Product Description

GIICLZ drum gear coupling

GIICLZ drum-shaped gear coupling has the relative offset performance of 2 axes compensated in a certain angle direction, and works long distance with the middle axle. It is suitable for connecting horizontal 2 coaxial lines with a certain angular displacement of the transmission shafting.

·Features
1.Small radial dimension and large bearing capacity are commonly used in shafting transmission under low speed and heavy load conditions.
2.Under the same outer diameter of the inner gear sleeve and the maximum outer diameter of the coupling, the load-carrying capacity of the drum-shaped gear coupling is 15-20% higher than that of the straight-tooth coupling on average.
3.It can compensate the relative offset of 2 axes in a certain angle and work long distance with the middle axle.
4.It is suitable for connecting horizontal 2 coaxial axes and driving shafting with a certain angle displacement.

·GIICLZ Drum Gear Coupling Main Dimension And Parameter(JB/T8854.1-2001)

Type
 
Nominal torque
(kn·m)
Allow speed
(R/min)
Shaft hole diameter Shaft hole length D D1 D2 D3 C H A B e Rotary inertia
Kg.m2
Weight
d1 d2 Y J1type
GIICLZ1 0.4 4000 30 35 82 60 103 71 71 50 8 2 18 38 38 0.005 4.1
GIICLZ2 0.71 4000 25 28 62 44 115 83 83 60 8 2 21 44 42 0.00625 4.8
GIICLZ3 1.12 4000 25 28 62 44 127 95 95 75 8 2 22 45 42 0.011 7.8
GIICLZ4 1.8 4000 63 65 142 107 149 116 116 90 8 2 24.5 49 42 0.039 16.5
GIICLZ5 3.15 4000 63 65 142 107 167 134 134 105 10 2.5 27.5 54 42 0.5175 23.1
GIICLZ6 5 4000 80 85 172 132 187 187 187 153 10 2.5 28 55 42 0.10425 35.4
GIICLZ7 7.1 3750 100 105 212 167 204 170 170 140 10 2.5 30 59 42 0.1898 54.3
GIICLZ8 10 3300 100 110 212 167 230 186 186 155 12 3 33.5 71 47 0.297 67.4
GIICLZ9 16 3000 130 135 252 202 256 222 212 180 12 3 34.5 37 47 0.575 104.4
GIICLZ10 22.4 2650 130 145 252 202 287 239 239 200 14 3.5 39 82 47 0.935 133.5
GIICLZ11 35.5 2350 160 170 302 242 325 250 250 235 14 3.5 40.5 85 47 1.625 193
GIICLZ12 50 2100 190 200 325 282 362 286 313 270 16 4.0 44.5 95 49 3.093 290
GIICLZ13 71 1850 200 220 352 282 412 322 350 300 18 4.5 49 104 49 6.34 370
GIICLZ14 112 1650 240 250 470 330 462 420 335 380 22 5.5 86 148 63 8.6 509
GIICLZ15 180 1500 280 285 470 380 512 470 380 380 22 5.5 91 158 63 15.575 740
GIICLZ16 250 1300 280 300 470 380 580 522 430 430 28 7 104.5 177 67 26.35 974
GIICLZ17 355 1200 250 260 410 330 644 582 490 28 7 99 182 67 38.825 1110
GIICLZ18 500 1050 340 360 550 450 726 658 540 28 8 111 215 75 49.5 1465
GIICLZ19 710 950 340 320 470 380 818 748 630 32 8 116 220 75 139.5 2457
GIICLZ20 1000 800 480 500 650 540 928 838 720 32 10.5 123.5 235 75 277.25 3793
GIICLZ21 1400 750 480 500 650 540 1571 928 810 40 11.5 127.5 245 75 435 4780
GIICLZ22 1800 650 670 680 900 780 1134 1036 915 40 13 131 255 75 852.25 7540
GIICLZ23 2500 600 670 710 900 780 1282 1178 1030 50 14.5 149.5 290 80 1638.75 11133
GIICLZ24 3550 550 800 850 1000 880 1428 1322 1175 50 16.5 158.5 305 80 2976.25 16110
GIICLZ25 4500 460 1000 1040 1100 1644 1538 1390 50 19 162.5 310 80 7198.25 27797

·Product Show

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible
Customization:
Available

|

Customized Request

China best Good Quality Gear Coupling with Elastic Pins

pin coupling

What Are the Maintenance Requirements for Pin Couplings?

Pin couplings are known for their simplicity and ease of maintenance. Regular maintenance helps ensure the longevity and optimal performance of pin couplings in various mechanical systems. Here are the key maintenance requirements for pin couplings:

  • Lubrication: Most pin couplings require periodic lubrication to reduce friction between the pins and the coupling hubs. Lubrication helps prevent wear and corrosion, ensuring smooth operation.
  • Inspection: Regular visual inspections are essential to identify any signs of wear, misalignment, or damage. Inspecting the pins, coupling hubs, and surrounding components can help detect potential issues early on.
  • Torque Check: It is crucial to periodically check and retighten the bolts or screws that secure the coupling to the shafts. Loose fasteners can lead to misalignment and coupling failure.
  • Alignment: Proper shaft alignment is critical for the effective functioning of pin couplings. Regularly check and adjust the alignment if necessary to minimize wear and vibrations.
  • Environmental Protection: In harsh environments or corrosive conditions, take measures to protect the pin coupling from contaminants or chemicals that could cause damage.
  • Replacement of Worn Components: When any of the coupling components, such as pins or hubs, show signs of significant wear, they should be replaced promptly to prevent further damage.

It is important to follow the manufacturer’s maintenance guidelines and recommendations for the specific type of pin coupling used in the application. Regular maintenance not only ensures the smooth operation of the coupling but also helps prevent unexpected breakdowns and reduces the risk of costly downtime. Proper maintenance can extend the service life of pin couplings and contribute to the overall reliability of the connected equipment.

pin coupling

What Industries Commonly Use Pin Couplings for Power Transmission?

Pin couplings are widely used in various industries for power transmission due to their ability to accommodate misalignment and provide reliable torque transmission. Some of the industries where pin couplings are commonly employed include:

  • 1. Manufacturing: In manufacturing processes, pin couplings are used in conveyor systems, mixers, agitators, and other machinery to transfer power between motors and driven equipment.
  • 2. Pulp and Paper: The pulp and paper industry uses pin couplings in machinery such as pumps, fans, and rotary kilns for continuous power transmission.
  • 3. Chemical and Petrochemical: Pin couplings find applications in chemical processing plants, refineries, and petrochemical facilities for various rotating equipment.
  • 4. Water and Wastewater: Pin couplings are used in water treatment facilities, pumps, and blowers to transfer power efficiently.
  • 5. Steel and Metal Processing: Steel mills and metal processing plants utilize pin couplings in rolling mills, extruders, and other equipment.
  • 6. Food and Beverage: Pin couplings are employed in food processing machinery, packaging equipment, and conveyor systems.
  • 7. Mining and Quarrying: The mining industry uses pin couplings in crushers, conveyor belts, and various mineral processing equipment.
  • 8. Oil and Gas: Pin couplings are used in the oil and gas sector for pumps, compressors, and drilling equipment.
  • 9. Power Generation: In power plants, pin couplings are used in turbines, generators, and other power transmission systems.
  • 10. Construction and Heavy Equipment: Pin couplings find applications in construction machinery, earthmoving equipment, and other heavy-duty machinery.
  • 11. Agriculture: In agricultural machinery, pin couplings are used in tractors, irrigation systems, and grain processing equipment.

These are just some examples of the industries where pin couplings are commonly used. Pin couplings offer versatility, ease of installation, and reliability, making them suitable for a wide range of applications in different sectors where power transmission is essential.

pin coupling

Can Pin Couplings Handle Misalignment Between Shafts?

Yes, pin couplings are designed to accommodate a certain degree of misalignment between shafts in rotating machinery. They are considered flexible couplings, which means they can provide some degree of angular, parallel, and axial misalignment capability.

Pin couplings typically consist of two hubs, each connected to a shaft, and a central sleeve with pins that transmit torque between the hubs. The pins allow for a limited range of movement, which helps to compensate for slight misalignments between the shafts.

The angular misalignment capacity of a pin coupling is achieved through the bending of the pins. When the shafts are misaligned at an angle, the pins on one side of the coupling experience bending while those on the opposite side are in tension. The pins are designed to withstand these bending and tension forces within their elastic limits, ensuring proper functioning and longevity of the coupling.

Similarly, the pins can accommodate parallel misalignment by sliding within the pin holes of the coupling’s central sleeve. This sliding action allows the hubs to move slightly relative to each other, compensating for any offset between the shafts.

However, it is essential to note that pin couplings have limitations in terms of the amount of misalignment they can handle. Excessive misalignment beyond their specified limits can lead to increased wear on the pins and other coupling components, reducing the coupling’s effectiveness and potentially causing premature failure.

While pin couplings are suitable for applications with moderate misalignment requirements, they may not be the best choice for applications with significant misalignment or where precise alignment is critical. In such cases, more flexible couplings like gear or elastomeric couplings may be more appropriate.

Overall, when considering the use of pin couplings, it is essential to carefully evaluate the specific misalignment requirements of the application and select a coupling that can adequately accommodate those misalignments while ensuring reliable and efficient power transmission.

China best Good Quality Gear Coupling with Elastic Pins  China best Good Quality Gear Coupling with Elastic Pins
editor by CX 2024-01-19