TF Kind Flanges
Model TF flanges are made from the exact same high-strength cast iron because the S flanges, but are intended to accommodate the global typical Taper Lock bushing for uncomplicated set up and removal
TF Variety flanges allow for mounting the bushing within the front (hub) side in the flange
TF flanges can be found in sizes six by sixteen and can be employed with any style of sleeve as pictured on webpage SF-5
TR Variety Flanges
TR flanges are related to the TF design, but let for that Taper Lock Bushing to be mounted and eliminated from
the reverse or serration side with the flange
The restricted torque ratings from the Taper Lock Bushings make it possible for TR flanges to only be utilized with EPDM or Neoprene sleeves
Various bushing sizes are applied, so they’ve unique optimum bores compared to the TF flanges
Sizes 6 by way of sixteen can be found
Taper-Lock Bushings
The industry conventional taper lock bushing is actually a split style and design permitting a compression fit of the flange towards the shaft with no set screws
The very simple style makes the installation and elimination effortless while the 8° taper grips tight and offers great concentricity
A Reduced level of inventory may be attained due to the many other power transmission components that use Taper Lock Bushings for example: sheaves, sprockets, and pulleys
isn’t going to give the Taper-Lock Bushings themselves as they are broadly offered from other manufacturers